DN-X500 Professional DJ Mixer

Denon's DN-X500 is a 4U rackmountable mobile/club DJ analog matrix mixer with rock-solid construction and superb audio fidelity. The DN-X500's 8 line and 2 phono inputs are assignable to any of 4 channels. This 8-channel input matrix routing gives you the freedom to move any source to any channel or even the same source to multiple channels for remixing. The DN-X500 features 4 smooth 60mm VCA channel faders for level control and a responsive 45mm VCA crossfader with contour adjustment. Independent pre-fader level meters allow you to optimize and match levels for each source, so you can be sure the transition crossfading between sources is smooth. The DN-X500 also features 3-band EQ with full output kill, booth output with channel select, 2 mic inputs with talkover sensitivity and effects send/return with cue, dry/wet knob, and channel select. Plus, with the optional ACD-46 rotary fader kit, you can easily swap out any channel fader (1-4). Matrix input assignment: 8 input sources are freely assignable to any channel or even multiple channels 8 line/2 phono switchable 4 smooth 60mm VCA channel faders Responsive 45mm VCA crossfader with contour adjust Independent channel PFL meters: all input levels can be adjusted in advance to match the gain levels, insuring a smooth transition between fades Independent 3-band EQ kill (High-Mid-Low) Independent EQ on/off switch Booth output assign selector: pre-monitor any channel including Master through the booth output as you would with your headphones, with volume control External send/return control: multichannel assignable, effect on/off, effect cueing (pre & post), effect dry/wet knob Independent channel A-B post switch (crossfader) Powerful clean headphone output Fader start (5V pulse): crossfader and channel fader-start trigger is compatible with all Denon DJ CD/MP3 players Compact 4U rackspace with recessed rear terminals Independent 3-band main and aux mic EQ Independent CUE system (all channels) Mic talkover function with sensitivity adjustment Split/cue headphone monitor with PFL metering Master output -10dB attenuation switch Master output stereo/mono switch Record out - RCA/unbalanced Subwoofer/lighting output with freq. adjust: ideal for powered speakers, powered amp, or even a signal feed for lighting systems. Audio Specs: Input Level and Impedance: 8-Line-14dBV (200 mV) 50kOhms 2-Phono -50dBV (3.0mV) 50kOhms Effect (Return) -14dBV (200mV) 50kOhm Main Mic -54dBV (2.0mV) 10kOhms Aux Mic -60dBV (1.0mV) 10kOhms Output Level and Impedance: Balanced 4dBm (1.23V) 600 ohms Unbalanced 0dBV (1.0V) 1k ohm Booth (Balanced) 4dBm (1.23V) 600-ohm load Rec (RCA) -10dBV (316mV) 1k Ohm Effect (Send) -14dBV (200mV) 1k Ohm Subwoofer/Lighting 2dBm (975mV) 600 ohms Headphone 0dBV (1.0V) 32 ohms Frequency Response: Line 20 to 20kHz ±2dB Phono 20 to 20kHz RIAA ±2dB Mic 20 to 20kHz ±2dB Signal to Noise Ratio: Line 82dB (0dBm, 1kHz, EQ flat) Phono 75dB (0dBm, 1kHz, EQ flat) Main Mic 65dB (0dBm, 1kHz, EQ flat) Total Harmonic Distortion Rate: Line Below 0.05% Phono Below 0.05% Crosstalk Over 70dB Channel Equalizer: Hi +10dB, -35dB (16kHz) Mid +10dB, -35dB (1kHz) Low +6dB, -35dB (60Hz) Microphone Equalizer: Hi +12dB, -12dB (10kHz) Mid +12dB, -12dB (1kHz) Low +12dB, -12dB (100Hz) Dimensions: 19"W x 4-2/5"H x 6-9/10"D (482 x 112.5 x 177mm) Weight: 5.8kg, 13 lbs. Power supply: AC120 V ±10%, 60 Hz Power consumption: 27W